With its intelligent routing solutions, Quick Eagle introduces a new approach to routing. Quick Eagle’s access routers provide multifunctional capabilities in one device, enabling you to reduce total cost of ownership and decrease points of failure. Furthermore, the unique hardware and software architecture enables wire speed performance that by far exceeds traditional router capabilities.

Quick Eagle’s router solutions address the needs of small and remote offices that might use ADSL or G.SHDSL as their access technology as well as larger organizations that base their connectivity on NxT1/E1 links.

DL700 ADSL2+ Router
Designed specifically for the small business and remote office market, the DL700 ADSL2+ Router is an all-in-one device with integrated ADSL modem, auto-sensing Ethernet switch, stateful inspection firewall, WLAN access point, QoS capabilities and VPN functionality.

DL710 ADSL2+ Router
Designed specifically for the small business and remote office market, the DL710 ADSL2+ Router is an all-in-one device with integrated ADSL modem, auto-sensing Ethernet switch, stateful inspection firewall, WLAN access point, QoS capabilities and VPN functionality. Compared with the DL700 ADSL2+ Router, the DL710 comes in addition with two FXS and one FXO port to enable VoIP applications.

4335 Access Router
The 4335 Access Router is a scalable (up to 2xT1/E1) branch-office router that comes with two Ethernet ports (10/100 and 10 BaseT). The second Ethernet port might be used for redundant fail-over to a backup VPN link by connecting to a DSL, cable, or last-mile wireless modem (likely with a VPN appliance between router and modem). The second port could also be used to load-balance LAN traffic. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth shaper turn this router into a multifunctional device.

5840 Multiport Router
The 5840 Multiport Router (available for NxT1/E1) is a bandwidth scalable (up to 12 Mbps for T1 or up to 16Mbps for E1), IP aware, intelligent WAN access router, offering standards-based inverse multiplexing (NxT1/E1) and multilink capabilities. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth shaper turn this router into a multifunctional device.

5842 Multiport Router
The 5842 Multiport Router (NxT1/E1) is bandwidth scalable (up to 8 Mbps), IP aware, intelligent WAN access router, offering standards-based inverse multiplexing (NxT1/E1) and multilink capabilities. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth shaper turn this router into a multifunctional device.

5844 Multiport Router
The 5844 Multiport Router (4xT1/E1) is an IP aware, intelligent WAN access router, offering standards-based inverse multiplexing (4xT1/E1) and multilink capabilities. An integrated CSU/DSU, WAN Probe, stateful inspection firewall, and an optional bandwidth shaper turn this router into a multifunctional device.

DL4840 G.SHDSL Access Platform
The DL4840 G.SHDSL Access Platform is a cost-effective, Ethernet-based transmission system that takes advantage of the latest G.SHDSL technology. Extended Rate Bonded G.SHDSL (G.SHDSL.bis) offers unprecedented possibilities for symmetric transmission over ordinary copper lines. The DL4840 comes equipped with four G.SHDSL ports. Each G.SHDSL port supports up to 5.69 Mbps (1 pair / 2-wire mode) or 11.38 Mbps (2 pair / 4-wire mode) symmetrical data throughput over copper. The DL4840’s G.SHDSL ports can be used as individual ports or bundled together in a virtual pipe, enabling maximum throughput rates of up to 45 Mbps.

DL4880 G.SHDSL Access Platform
The DL4880 G.SHDSL Access Platform is a cost-effective, Ethernet-based transmission system that takes advantage of the latest G.SHDSL technology. Extended Rate Bonded G.SHDSL (G.SHDSL.bis) offers unprecedented possibilities for symmetric transmission over ordinary copper lines. The DL4880 comes equipped with eight G.SHDSL ports. Each G.SHDSL port supports up to 5.69 Mbps (1 pair / 2-wire mode) or 11.38 Mbps (2 pair / 4-wire mode) symmetrical data throughput over copper. The DL4880’s G.SHDSL ports can be used as individual ports or bundled together in a virtual pipe, enabling maximum throughput rates of up to 91 Mbps.